CCA
Posts:6
 |
| 06/08/2008 8:27 AM |
|
Sorry for my English, Im from Russia
Can not connect server.
Error: Terminal server - yet not ready.
Befor this problem terminal connect Server, but not stability.
Delete antivirus and firewall... Update Win XP SP3... Install Terminal 4.03.094
What can I do else?
Specialists from NETOPIA (official yuors representetivs) cannot advise anything...
|
|
|
|
|
CCA
Posts:6
|
| 06/08/2008 8:47 AM |
|
Ad. information
LAN is normal, becouse I see from Console all Terminal information and can change it.
Update flash: 5.4 build:14328
We have 2 terminals, and both cannot connect Server |
|
|
|
|
hjkcga
Posts:151
|
| 06/09/2008 12:36 PM |
|
DHCP or Static?
Did you flash the BIOS of the L130/230? Password "updateme"
When you updated to SP3 did windows firewall turn back on? |
|
|
|
|
hilo
Posts:1
|
| 06/10/2008 4:40 AM |
|
maybe worth the check,
check for LAN speed, my L130 will only work with 100Mbps LAN. |
|
|
|
|
CCA
Posts:6
|
| 06/10/2008 9:03 AM |
|
Static terminal 10.0.0.100
Server 10.0.0.22
flash from L230 with updateme done.
Firewall all time is OFF.
LAN speed is 100Mb (D-Link DES-1018DG show and LANcard of Server)
|
|
|
|
|
hjkcga
Posts:151
|
| 06/10/2008 12:30 PM |
|
Posted By CCA on 06/08/2008 8:27 AM
Befor this problem terminal connect Server, but not stability.
If stability was a problem before the update, maybe stability is the problem after the update.
Do you have the latest driver on your LAN card?
Do you have a hub or switch?
Have you tried a different port on the hub or switch?
Are you running at least Cat5E?
Could you try a new cable?
Are you using TS2 or TS3 or Auto to detect the host?
Try using TS2. |
|
|
|
|
CCA
Posts:6
|
| 06/12/2008 3:54 AM |
|
The problem of stability was: Not allways connect from first time. Sometimes connected only on 4 or 6 tryes after server reset with switching off any antivirus (Kaspersky ore Nod) or firewall.
I will try to have latest driver for LAN card...
We have HUB D-Link DES-1018DG.
I tried different port on HUB.
Cables Cat 5e.
I will try new cable...
Im using autodetect on terminal.
I see terminal from server and can change its properties from Server using NCT-2000-XP Console. |
|
|
|
|
CCA
Posts:6
|
| 06/12/2008 5:34 AM |
|
Driver of LAN card - is latest...
Switch new tested cables using HUB D-Link DGS-1005D (1 port - Server, 2 port - terminal)
The situation is the same: Server is not ready
:-(
Server parametres: Celeron CPU 2,8 GHz, 512 Mb DDR |
|
|
|
|
Hugh
Posts:2
|
| 06/13/2008 1:55 AM |
|
May be the problem is the connecting server time-out period is too short for your IT structure, do you switch has port power saving functions? or firewalls has ability to throw the first data-packet?
or have you installed Kaspersky or Trend antivirus? Uninstall them and try again. |
|
|
|
|
okto2005
Posts:3
|
| 10/07/2008 12:24 AM |
|
dear member,
im from indonesia...
this trouble had happen to my office station today....
anyone had a solution?
my OfficeStaition server AMD 2GHz w 1G Memory connected with 1 L130 and 2 L110 through switch DGE-1008ES.
with no antivirus installed nor firewall. |
|
|
|
|
ondeda
Posts:21
|
| 10/10/2008 11:24 AM |
|
| try giving your OS a fresh install and see what happens.. |
|
|
|
|
bossuzzi
Posts:4
|
| 10/14/2008 6:56 AM |
|
HI ,
Did you fix this problem? if so , how? im having this same issue but with a L200 i see the server but it gives this same error, thanks
Posted By CCA on 06/08/2008 8:27 AM
Sorry for my English, Im from Russia
Can not connect server.
Error: Terminal server - yet not ready.
Befor this problem terminal connect Server, but not stability.
Delete antivirus and firewall... Update Win XP SP3... Install Terminal 4.03.094
What can I do else?
Specialists from NETOPIA (official yuors representetivs) cannot advise anything...
|
|
|
|
|
palmeida
Posts:2
|
| 10/14/2008 5:52 PM |
|
Hi,
Two months ago I had this problem too and in my case the problem was with a update driver provide by Microsoft for my video card (NVidia Quadro FX 570).
I solved this problem by removing the driver and download the lastest driver from Nvidia directly and not aply the driver from MS Windows update.
So, i suggest that you can start by removing your video driver from your system then restart the computer and test a connection from a client to see if the issue disappeared. If so, then download the driver from your manufacturer of your graphics card.
I also did a test with another graphics card from Nvidia (Quadro NVS 285) and result on the same problem. Apparently this seems to happen with Nvidia graphics cards where there are updates from Microsoft.
I hope that this result in your case.
Cheers...
|
|
|
|
|
okto2005
Posts:3
|
| 10/29/2008 11:23 PM |
|
the last solution is i rollback with system restore......... the problem solved....
but this problem had happenned to my another officestation server. which the systemrestore active, but the restore point not available on this server idunno what happen with the restore point.....
then this server cannot be rollback.... and i dont know how to resolve this problem... and i dont want to fresh install the Operating System.
the fresh installing is not the best solution.... that's stupid morron solution.
in the next future if this happen again do you want to fresh install again again and again?????????? and you dont wanna know the right solution??????????
i use the old ncomputting terminal server the message in station: TS Error - WinLogon Failed. then i upgrade to latest Terminal Server program and message is: TS Error - Not yet ready blah blagh blah.............
Is there any solution for this NCOMPUTING L Series???? PLease answer my question Ncomputing Technical Support. |
|
|
|
|
hjkcga
Posts:151
|
| 10/30/2008 11:57 AM |
|
okto2005
No the solution is not a fresh install each time it happens. The solution is to turn off the automatic updates and only do them when you are ready. ie have a backup and/or a roll-back point.
Ncomputing Technical Support does not come through these forums. This is only a user forum. Contact them directly. |
|
|
|
|
CCA
Posts:6
|
| 11/05/2008 12:28 PM |
|
My solution - reinstall operational system
and find money for new computer with soft...
This equipment is not working continius
And best regards for "Technical Support" with there managers |
|
|
|
|
vlim13
Posts:2
|
| 11/16/2008 6:06 PM |
|
I upgraded to the latest software last week, and now have this "Terminal Server - not yet ready" error. I didn't have a restore point made before this, and if NComputing doesn't release any updates soon, we'll end up throwing away the hardware and buying real PCs.
It's a shame, too. We had high hopes, and I'm glad we only bought 2 units for our test. It took forever to install, uninstall, reinstall, to get around a recent problem with their software. It's so annoying having to do that, and reboot. It's almost as if you find a good version, don't upgrade or you'll risk a high chance in breaking your existing installation.
Based on others' complaints about NComputing, I doubt they'll even respond or release a patch for this in any reasonable amount of time. |
|
|
|
|
TCAM
Posts:8
|
| 11/19/2008 12:25 AM |
|
Be sure that if you are using the latest NCT software, you have SP3 installed. We recently encountered the "Terminal Server - yet not ready" error on a Win XP Pro SP2 machine that was running NCT 4.03.099. After installing SP3, the error went away. |
|
|
|
|
sopsec
Posts:1
|
| 11/20/2008 7:25 AM |
|
Hello everybody, i have the same problem and after one day testing all versions with and without SP3.
I call to NComputing Support and have this help.
No matters the version u have (.97 or .99) with SP3, no problem.
Just check your regestry, and see if you have this entry.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"SessionImageSize"=dword:00000020
Thx to North America Technical Support |
|
|
|
|