To see this and other product readmes, please take a look at our knowledgebase (http://www.ncomputing.com/support.aspx) and enter the search string "readme".

Product Release Notes for Version 4.03.094 from May 28, 2008

Thank you for using NComputing products. These release notes contain important information regarding the newest available release for your NComputing device or software. NComputing strongly recommends you read the entire document thoroughly prior to installation.

Product: NCT-2000-XP for L-Series devices

Version: 4.03.094

Contents

• Changes in this Release

• About NComputing

• Disclaimer

Changes in this Release

This section documents changes and enhancements to NComputing’s current L-Series releases.

Product Type / Model: L-series support for Genuine L-Series products

Changes since previous release of 4.03.091 include:

• Windows® XP SP3 support: NComputing has tested with the SP3 update, but NComputing advises that before you update to SP3 you should first test on a system to determine the impact to your environment since Microsoft has enforced new behavior changes with Remote Desktop Users settings.

  • The following NComputing notice may appear if you install over a host with SP3 installed, “Important notice: XP SP3, Microsoft has made user account policy changes”.

  • Microsoft has made user account “policy changes” which sets a default to only allow administrators to connect using terminal services that may result in the error Microsoft message: "The local policy of this system does not permit you to logon interactively". To overcome these changes the administrator needs to adjust user account settings to add them into "Remote Desktop Users" groups. NComputing has posted additional information on how to configure for remote user groups in our NComputing Knowledge Base at http://www.ncomputing.com/support.aspx. To locate this information in the knowledge base; search on the words "logon rights" or "remote desktop users."

• It is advised that if you did not update to version 4.03.090 previously, that you apply the update to v090 (or v091) before updating to this version. See article at http://www.ncomputing.com/support.aspx and search on the term “4.03.091”.

• Within the NCT console  software settings  sessions, a right click on the session may trigger the MMC error screen. Just ignore the error by selecting either of the "continue..." options. This error has no impact on functionality.

• Note: This update may not be applicable to certain older L-series models; if so, the update process will advise you and will not complete the install.

All NComputing software is subject to NComputing intellectual property rights and may be used only on Genuine NComputing hardware in accordance to the NComputing End User Licensing agreement and Terms of Use.

Contacting Technical Support and Additional Resources

• Visit NComputing’s Knowledge Base at http://www.ncomputing.com/support.aspx for more information.

• To request NComputing’s Technical Support, please visit the NComputing.com Support page: http://www.ncomputing.com

• For general information about NComputing Inc., please visit our web site at:
  http://www.ncomputing.com

About NComputing

NComputing enables organizations to harness the untapped power of existing PCs so that everyone can affordably access computing. Thousands of schools and businesses all over the world have used NComputing solutions to realize huge reductions in their computing costs while minimizing environmental impact.

NComputing Inc. always welcomes comments and suggestions with regard to our newest offerings and enhancements. Please contact us anytime using the contact form located at: http://www.ncomputing.com/Contactform.aspx

Disclaimer

Information contained in this document may have been obtained from internal testing or from a third party. This information is for informational purposes only. Information may be changed or updated without notice. NComputing reserves the right to make improvements and/or changes in the products, programs and/or specifications described herein anytime without notice.

We acknowledge all trademarks. Microsoft and Windows are registered trademarks of Microsoft Corporation. All trademarks are the property of their respective owners.

© 2008, by NComputing Inc, All rights reserved, May. / 2008. NComputing is a registered Trademark of NComputing Inc.

No part of this document may be used or reproduced in any manner whatsoever without the permission of NComputing.
Please visit www.ncomputing.com for additional product information.